Prev Next

XPB40

- Twin Tub
- 4kg
- Pump
- Plastic Body
-size(WxDxH):62,1x38.3x70cm
- White
 


XPB65

- Baby Laundry
- Single Tub
- 6.5 kg
- Plastic Body
-size(WxDxH):56x 47x84.5cm
- White and Blue


Discover more

QCWT1140

- Dishwasher
- 14 Place Settings
- 6 Programs: Intensive / Eco / Light / 60 min / Rapid / Pre-rinse
- Digital Display
- A++ Energy Efficiency Class
- 1-24hr Delay Start
- Auto restart
- Silver
- Dimensions(WxDxH): 65.6x67.5x87.5cm
Troubleshooting:
E1: the door is opened when the dishwasher is operating.
E2: water inlet malfunction.
E3: water drainage malfunction.
E4: temperature sensor malfunction.
E5: overflow occurs/water leakage occurs.
E6: water leakage occurs.
E7: abnormal heating.
  *After you check the items and remove the trouble, restart the washing machine. If there is still an abnormality, please unplug the power plug and call our customer service phone as soon as possible (05 80 11 44 - EXT: 104).


 




Discover more

QCDV-80

8KG Vented Dryer , 

stainless drum,
Window transparant square door, 
Display, 
White
size(WxDxH):60x54x85cm
troubleshooting:

Dryer does not work:     
                                        - mains plug is not plugged in
                                       -  loading door is open                         

Drying results unsatisfactory:
                                             - wrong programme selected
                                             -Filter clogged
                                             -Incorrect volume of laundry.

Drum light does not work:                                                                                                              -light bulb is defective.


Drying cycle ends shortly after programme starts. “End” light illuminated:                                                                                                  -not enough washing loaded is too dry for selected programme.

Drying cycle lasts an unusually long time:
                                                           -load volume is too big.
  *After you check the items and remove the trouble, restart the washing machine. If there is still an abnormality, please unplug the power plug and call our customer service phone as soon as possible (05 80 11 44 - EXT: 104).
 



Discover more

QCDC-91W

9 KG Condenser Dryer ,

 Stainless Steel Drum,
 Seal Square Door, 
White
size(WxDxH):59x60x85cm
Troubleshooting:
Dryer does not work:
                                       - mains plug is not plugged in
                                       -  loading door is open
                                  
Drying results unsatisfactory:
                                          - wrong programme selected
                                         -Filter clogged
                                         -Incorrect volume of laundry.
                                         -The sediment on humidity sensor.
Drum light does not work:
                                          -light bulb is defective.
Drying cycle ends shortly after programme starts. “End” light illuminated:
                       -not enough washing loaded or washing loaded is too dry for selected  programme.
Drying cycle lasts an unusually long time:
                                                                   - load volume is too big.
 
*After you check the items and remove the trouble, restart the washing machine. If there is still an abnormality, please unplug the power plug and call our customer service phone as soon as possible (05 80 11 44 - EXT: 104).
 



Discover more

QCWFD12-6

      - Front Load Washer and Dryer 
- Speed: 1400 RPM
- Washer Capacity: 10KG
- Dryer Capacity: 6KG
- Water Pressure: 90Mpa
- Digital Led
- Drum Clean 
- Speed up Option 
-size(WxDxH):65x70x88.5cm
- Available in: White

Troubleshooting:
 

dE: • Check wiring harness, drying board and computer board.
 • Please contact after-sales service department to repair or replace parts.
5F: • Check whether the water tap for water supply is opened.
• Clean the filter cover of water inlet valve.
• Check the water pressure.
• Contact with the after-sales service department to replace the computer board or other parts and components.
-F : • Check whether the drain hose is clogged.
• Clean the filter cover of drainage pump.
• Check whether the drain hose is installed correctly.
• Contact with the after-sales service department to replace the
water level sensor or other parts and components.
HF: • Check whether the harness terminal is connected securely or whether to replace the harness.
• Contact with the after-sales service department to replace the heating tube or other parts and components.
3[3H: • Wait for interference disappearing, restart the machine after power off.
• Contact with the after-sales service department.
 
*After you check the items and remove the trouble, restart the washing machine. If there is still an abnormality, please unplug the power plug and call our customer service phone as soon as possible (05 80 11 44 - EXT: 104).
 
 
 

 


Discover more

QCWF85

Advenced washing machine,
inverter,
full digital display,
1400 RPM,
WHITE, black
8 KG
size(WxDxH):60x47x83cm
MADE IN ITALY 
Troubleshooting:
F01: reopen the door and close it with a slight push.
F02: start the drain program and wait about 2 minutes.
• start the cotton program and check if the water comes out of the detergent drawer with normal flow. if not, check the following:
make sure that the tap is open and that there is water supply.
2. make sure the inlet hose is not bent.
3. make sure the water inlet hose and/or the valve filters are not blocked.
F03: turn off the washing machine and restart the wash programme.
F04:  Remove the drain hose from the drainage line and make sure it directly drains into a container/sink, then select the drain programme.
 Make sure the drain pump filter is not obstructed.
Make sure the drain hose is not squashed or kinked.
F05: Switch off the washing machine and switch it back on
F09: Switch off the washing machine and switch it back on
The door does not open:
                                               -Make sure the red light is off
                                              - Make sure the appliance is not in soak mode or rinse hold special option.
                                              - Press on the door from the closing side or give a slight push while trying to open at the same time.

  *After You Check The Items And Remove The Trouble, Restart The Washing Machine. If There Is Still An Abnormality, Please Unplug The Power Plug And Call Our Customer Service Phone As Soon As Possible (05 80 11 44 - Ext: 104).
 
 


Discover more

XPB70

- Twin Tub
- 7 kg
- Pump
- Plastic Body
-size(WxDxH):76x42.9x84cm
- White
 


QCWF85S

Advenced washing machine,
inverter,
full digital display,
1400 RPM,
SILVER,
8 KG,
size(WxDxH):60x47x83cm
MADE IN ITALY .
Troubleshooting:
F01: reopen the door and close it with a slight push.
F02: start the drain program and wait about 2 minutes.
• start the cotton program and check if the water comes out of the detergent drawer with normal flow. if not, check the following:
make sure that the tap is open and that there is water supply.
2. make sure the inlet hose is not bent.
3. make sure the water inlet hose and/or the valve filters are not blocked.
F03: turn off the washing machine and restart the wash programme.
F04:  Remove the drain hose from the drainage line and make sure it directly drains into a container/sink, then select the drain programme.
 Make sure the drain pump filter is not obstructed.
Make sure the drain hose is not squashed or kinked.
F05: Switch off the washing machine and switch it back on
F09: Switch off the washing machine and switch it back on

The door does not open:
                                               -Make sure the red light is off
                                              - Make sure the appliance is not in soak mode or rinse hold special option.
                                              - Press on the door from the closing side or give a slight push while trying to open at the same time.
  *After You Check The Items And Remove The Trouble, Restart The Washing Machine. If There Is Still An Abnormality, Please Unplug The Power Plug And Call Our Customer Service Phone As Soon As Possible (05 80 11 44 - Ext: 104).
 
 


Discover more

QCF-11C

Heat pump dryer, 
9kg,
stainless steel drum, 
window transparant door, 
white. 
Troubleshooting:
F1: if the error appears during use, turn off and try again. If the error persists, contact qualified technical service center.
F2:  Turn off the dryer and check that the front, rear and bottom ventilation channels are not blocked. After checking, try again and if the error persists, contact qualified technical service center.
F3: Turn off the dryer and make sure that the fluff and impurity filters are not clogged. After checking, start again the appliance and if the error persists, contact qualified technical service center.
F4: Turn off the dryer and make sure the drain hose is not blocked or squashed. Make sure that the condensation tank is not full. After checking, try again and if the error persists, contact qualified technical service center.
F5: If the error appears during usage, turn off and try again. If the error persists, contact qualified technical service center.
F6: Make sure the door is correctly closed door and make sure that the nib present in the upper part is proper in its sit. After checking, try again and if the error persists, contact qualified technical service center.
F7: If the error appears during usage, turn off and try again. If the error persists, contact qualified technical service center.
F8: If the error appears during usage, turn off and try again. Make sure there is no metal object or damp cloth stuck on the humidity sensors. If the error persists, contact qualified technical service center.
 
  *After You Check The Items And Remove The Trouble, Restart The Washing Machine. If There Is Still An Abnormality, Please Unplug The Power Plug And Call Our Customer Service Phone As Soon As Possible (05 80 11 44 - Ext: 104).
 
 


Discover more

QCWT-10 W

Top Loading Washing Machine,
-10Kg, 
-24 hours preset,
-10 water levels selector,
-fuzzy logic,
-DIY program
-White Color
-size(WxDxH):53x54x91cm
Troubleshooting:
E1: After checking the drain and rectifying the fault, open the cover,
Close it, and re-enter the drain.
E2: Close the cover.
E3:  Open the top cover, place the clothes manually and close the cover.
E4: Open the tap or wait until the water pressure is normal before use.
Open the cover, close the cover, and re-enter the water inlet process.
 
E6: Please have professional maintenance personnel overhaul.
E7: Turn off the power after the water is finished. Please have professional service personnel repair it.
E9: Turn off the machine.
No display: please have professional maintenance personnel overhaul.
  *After you check the items and remove the trouble, restart the washing machine. If there is still an abnormality, please unplug the power plug and call our customer service phone as soon as possible (05 80 11 44 - EXT: 104).
 
 
 
 
 


Discover more

QCWT-200

- Top Loading Washing Machine
- 20 Kg
- Hydraulic Door
- Titanium Color
- Two Inlet Water
- Pump
- Metal Body
- Touch Control 
- Safety Child Lock
- Display Arabic Translation
- Color: White / Titanium
-size(WxDxH):64x65x100cm

Troubleshooting:
E0: Close the top lid and clear up the alarm.
E1: Open top lid, according to before troubleshooting and settlement to settle it, then close the top lid and clear up the alarm.
E2: Close the top lid and clear up the alarm.
E3: Open the top lid, make the laundries place equally, then close it and clear up the alarm.
E4: Open top lid, according to before troubleshooting and settlement to settle it. Then close the top lid and clear up the alarm.
E5: Close the top lid and clear up the alarm.
F1: Cut the power supply and call the technicians.
 
  *After you check the items and remove the trouble, restart the washing machine. If there is still an abnormality, please unplug the power plug and call our customer service phone as soon as possible(05-801144 / EXT: 104).
 


Discover more

QCWT-12W

Top Loading Washing Machine,
-12Kg, 
-24 hours preset,
-10 water levels selector,
-fuzzy logic,
-DIY program
-White Color
-size(WxDxH):53x54x91cm
Troubleshooting:
E1: After checking the drain and rectifying the fault, open the cover,
Close it, and re-enter the drain.
E2: Close the cover.
E3:  Open the top cover, place the clothes manually and close the cover.
E4: Open the tap or wait until the water pressure is normal before use.
Open the cover, close the cover, and re-enter the water inlet process.
 
E6: Please have professional maintenance personnel overhaul.
E7: Turn off the power after the water is finished. Please have professional service personnel repair it.
E9: Turn off the machine.
No display: please have professional maintenance personnel overhaul.
  *After you check the items and remove the trouble, restart the washing machine. If there is still an abnormality, please unplug the power plug and call our customer service phone as soon as possible (05 80 11 44 - EXT: 104).


Discover more

QCF-11CS

9 KG
Heat Pump Dryer,
Stainless Steel Drum,
Window transparant door,
size(WxDxH): 59x49x85cm,
silver.
Troubleshooting:
F1: if the error appears during use, turn off and try again. If the error persists, contact qualified technical service center.
F2:  Turn off the dryer and check that the front, rear and bottom ventilation channels are not blocked. After checking, try again and if the error persists, contact qualified technical service center.
F3: Turn off the dryer and make sure that the fluff and impurity filters are not clogged. After checking, start again the appliance and if the error persists, contact qualified technical service center.
F4: Turn off the dryer and make sure the drain hose is not blocked or squashed. Make sure that the condensation tank is not full. After checking, try again and if the error persists, contact qualified technical service center.
F5: If the error appears during usage, turn off and try again. If the error persists, contact qualified technical service center.
F6: Make sure the door is correctly closed door and make sure that the nib present in the upper part is proper in its sit. After checking, try again and if the error persists, contact qualified technical service center.
F7: If the error appears during usage, turn off and try again. If the error persists, contact qualified technical service center.
F8: If the error appears during usage, turn off and try again. Make sure there is no metal object or damp cloth stuck on the humidity sensors. If the error persists, contact qualified technical service center.
 
  *After You Check The Items And Remove The Trouble, Restart The Washing Machine. If There Is Still An Abnormality, Please Unplug The Power Plug And Call Our Customer Service Phone As Soon As Possible (05 80 11 44 - Ext: 104).
 


Discover more

where to buy

find a store near you